Best Batting Helmets for 13-14 Year Old Players

A batting helmet is the single most important piece of equipment for any baseball player. While other equipment is purchased to enhance skill and performance, the batting helmet is what protects our players from potentially serious injury. A properly designed and fitted batting helmet provides the confidence and assurance that when a player enters the batters box, that they are a safe as they can be. Below, I will explain how to choose a batting helmet and how to make sure that you select the proper size. Finally, there are several models with descriptions and specifications to assist you in identifying the best batting helmets for 13-14 year old players.

Safety First:

Every helmet I have listed below meets NOCSAE® safety standards. This can be determined by the NOCSAE® label on the helmet. Organized in 1969, NOCSAE is The National Operating Committee on Standards for Athletic Equipment. This is a non-profit organization whose sole mission is reduce injuries and death through standards and certification for athletic equipment.

An important reminder from the United States CDC tells us “DO NOT allow your athlete to use a cracked or broken helmet or a helmet that is missing any padding or parts. Check for missing or loose padding before the season and

regularly during the season. Parents or athletes should not attempt to repair helmet damage on their own.”


How to determine the proper size helmet for your player to wear:

Make sure you know the exact measurement of your childs head. Simply measure all the way around your players’ head. With a soft tape measure, start at the forehead, just above the eyebrows. Measure all the way around the back of the head, and then back to the forehead. Make sure the tape is straight and sitting just above the ears. If you do not have a tape measure, use a string in the same manner and then measure the string.

The Batting helmet sizing guide is at the bottom of this page. You can also read more detailed information about proper baseball equipment sizing in my article Baseball gear for kids – Making the right choice.

Now that you know the exact measurement, select a helmet from the list below. You will notice that I have put the hat size in the heading for each helmet. After you select the helmet link, make sure you are ordering the correct size by verifying in the description that it fits your childs exact head measurement. Different manufacturers refer to each size differently. Some use T-ball, youth, junior, senior, small, large, extra large or adult as size categories, others do not have that many sizing groups or may use others. The key is to make sure the whatever the designation is, you make sure your childs proper hat size is listed in the product description.

For example: your childs head is 22 inches in diameter. Looking at the sizing chart below, you will see that they are a hat size 7. Regardless of what the manufacturer calls that size Junior, youth, one size fits most or even adult, you will select the helmet with hat size 7 listed in the helmet specifications description.


C-Flaps: (Jaw Guards, Helmet Extensions)

Gaining popularity in head/face protection is the C-Flap, or jaw guard. An increasing number of Major League Baseball players are wearing the guards, making them a must have for younger players. The C-flap gives batters extra protection of their jaw and mouth on the side of the helmet facing the pitcher.

However, Adding a C-flap to your players existing helmet likely will not be allowed by your league. NOCSAE standards do not allow drilling or altering of a helmet as this voids the warranty and therefore would negate the NOCSAE safety certification. Before trying to add a C-flap to an existing helmet, check with your league administration to make certain it will be allowed.

For your player to be able to use a C-flap, a helmet will have to be purchased that has the C-flap installed by the manufacturer with the NOCSAE certification for the helmet with the C-flap attached.


Making your selection:

All the helmets I have listed for comparison below fit hat sizes between 6 1/8″ and 7 7/8″. If you need a smaller or larger size look at the description of the helmet to make sure your child’s size is included in the range. All of the helmets listed offer different size and color options.

I have compared all the major baseball equipment sellers to find the best prices for the eight batting helmets that I have featured below. These helmets are the most popular and highly rated. I check these prices regularly and continually update the page with the best value available.

Please feel free to email me directly if you have specific questions that are not answered here. You can reach me at Harley@baseballequipmentpro.com


Please visit my other baseball equipment pages for 13-14 year old players by clicking the following links:

Disclosures:

This post contains affiliate links. An affiliate link means that I may earn a referral fee if you purchase products through one of my links, without any additional cost to you.  

I am a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.


12 Days of Deals
The Season for Savings: 12 Days of Deals!


Recommended Helmets:


Easton Pro X Matte Batting Helmet w/ Jaw Guard

Junior Helmet Fits Hat Size: 6 1/2 – 7 1/8 – multiple colors available

Senior Helmet Fits Hat Size: 7 1/8 – 7 1/2 – multiple colors available

The Pro X™ is the most advanced helmet Easton® has ever introduced. All new Multi-Density Protection (MDP) technology, with 3 layers of energy absorbing foam, help address various speeds of impact players encounter in game situations. The ABS thermoplastic shell, lined with BioDri™ fabric for moisture management, is engineered for maximum protection, and the new pre-mounted Extended Jaw Guard offers players extra protection on the side of the helmet facing the pitcher. The Pro X™ has a matte finish, accented with tonal metallic for a fresh and sleek look, and meets the NOCSAE standard for all levels of play. It is available in Senior and Junior sizes.

  • ABS thermoplastic shell protects against impact without adding excess weight
  • Multi-Density Protection utilizes 3 layers of foam for maximum impact resistance
  • Forms a barrier around the head for ultimate protection
  • Extended jaw guard flap offers additional coverage along the side for superior protection
  • Utilizes BioDri™ padded liner to absorb moisture and keep you dry
  • Strategic ventilation ports maximize airflow to keep your head cool

Check Lowest Price Here  (Junior Helmet)                                                                                                                                                                                                                                                   

Check Lowest Price Here  (Senior Helmet)




Rawlings MACH Batting Helmet w/ Flap

Junior Helmet Fits Hat Size: 6 3/8 – 7 1/8 – multiple colors available

Senior Helmet Fits Hat Size:6 7/8 – 7 5/8 – multiple colors available

Today’s pitchers throw harder, and shots off the bat are faster than ever. As the industry leader in protective our engineers could not sleep until our gear matched the speed of the game. Introducing the New Mach Batting Helmet. Engineered to perform. Junior Sizing – 6 3/8 – 7 1/8 / Senior Sizing: 6 3/8 – 7 1/8

Designed with a sleek, optimized shell, the Rawlings® MACH Batting Helmet has IMPAX high performance padding that absorbs and disperses force for ultimate protection. The MACH batting helmet has a built-in faceguard extension for added protection to the jawline for right or left-handed batters.

  • Material: TPU rubber piece concealing hardware for seamless design
  • Material: TPU rubber piece concealing hardware for seamless design
  • Padding: iMpax – High performance, impact absorbing foam
  • Removable Panel: Attached EXT flap: high visibility design that provides additional facial coverage

 Check Lowest Price Here  (Junior Helmet)                                                                                                                                                                                                                           Check Lowest Price Here  (Senior Helmet)

                 Shop Now




Under Armour Converge 2-Tone Batting Helmet

Fits Hat Size: 6 1/2 – 7 1/2

Created to be a true next generation batting helmet with an all new anatomical shell design and innovative padding system. Designed to fit a wide variety of head shapes and sizes while maintaining full protection and comfortable fit. Strategically placed venting allows for maximum cooling and raised side ribs help disperse impact. The Converge batting helmet also marks the introduction of Charged foam cushioning, a layer of impact absorbing foam similar to what us used in footwear. We strive to provide the most comfortable and most protective helmet on the market and you’ll find it with the Converge. – Adult fits hat size 6 1/2 to 7 1/2 – Two Tone design – NOCSAE and SEI Certified – OSFA+ Helmet with wrapped charged foam liner – HeatGear liner keeps players cool and dry – Large ventilation ports – Foam and fabric treated with antimicrobial to treat unwanted bacteria and odors – Updated shell for added strength

  • Pre-mounted hardware for easy facemask attachment
  • Foam and fabric treated with antimicrobial to remove unwanted bacteria and odors
  • Completely updated shell with ridges and coregations for added strength
  • Large ventilation ports and HeatGear liner keeps player cool and dry
  • Charged foam liner
  • Adult size 6 1/2″ – 7 1/2″

Check Lowest Price Here  (Junior Helmet) 

Check Lowest Price Here  (Senior Helmet)

   

                                                                                                                                                                                                                                                                                    




Easton Z5 2.0 Matte Two-Tone Batting Helmet

Junior Helmet Fits Hat Size: 6 1/2 – 7 1/8 – multiple colors available

Senior Helmet Fits Hat Size: 7 1/8 – 7 1/2 – multiple colors available


Easton’s® popular Z5™ has gotten an upgrade. The high impact resistant ABS shell has been engineered for maximum protection, while the padded dual-density foam liner works to absorb shock on impact. The Z5™ 2.0 features a BioDri™ padded inner liner to keep players dry and cool, and the wrapped ear pads add extra comfort and prevent wear and tear throughout the season. The Z5™ 2.0 Matte Two-Tone has been updated with a fresh new-look, and meets the NOCSAE standard for all levels of play. It is available in Senior and Junior sizes.

  • High impact resistant ABS shell for maximum protection
  • Dual-density foam liner for shock absorption and comfort
  • BioDri padded inner liner absorbs moisture
  • Wrapped ear pads for durability and comfort
  • Senior – 7 1/8″ – 7 1/2″
  • Junior – 6 1/2″ – 7 1/8″

Check Lowest Price Here  (Junior Helmet)                                                                                                                                                                                                                                                     

Check Lowest Price Here  (Senior Helmet)

BaseballSavings.com



Mizuno B6 2-Tone Batting Helmet

S/M Helmet Fits Hat Size:6 3/4 – 7 3/8 – multiple colors available

L/XL Helmet Fits Hat Size: 7 3/8 – 7 7/8 – multiple colors available

Our newest helmet design, the B6 Batting Helmet is constructed with a durable ABS plastic shell and an EVA Foam inner core for superior protection and interior comfort. Drylite liner helps control moisture. Constructed with a durable, lightweight ABS plastic shell. Designed with an innovative Honeycomb Shell pattern to lower helmet weight, while providing high-level protection. EVA Foam inner core provides superior protection and interior comfort. Drylite liner helps control moisture. Meets NOCSAE standards.

  • Constructed with a durable, lightweight ABS plastic shell.
  • Designed with an innovative Honeycomb Shell pattern to lower helmet weight, while providing high-level protection.
  • EVA Foam inner core provides superior protection and interior comfort.
  • Drylite liner helps control moisture.
  • Meets NOCSAE standards.

Check Lowest Price Here (S/M Helmet)                                                                                                                                                                                                                                                           

Check Lowest Price Here  (L/XL Helmet)

BaseballSavings.com



Marucci DuraSpeed Batting Helmet

XS (Fits Hat Sizes: 6 – 6 3/4), S (Fits Hat Sizes: 6 3/8 – 6 7/8), M (Fits Hat Sizes: 6 7/8 – 7 1/4), L (Fits Hat Sizes 7 1/4 – 7 5/8)

The new Marucci Duraspeed Batting helmet features a three-layer protection system made up of an impact grade ABS shell, and a high-density absorption foam.

  • Three-layer protection system made up of an impact grade ABS shell, high-density absorption foam, and contour comfort foam
  • Six sleek ventilation portals for increased air flow
  • Laminated, moisture wicking liner and fully wrapped ear pads keep you cool, dry and comfortable
  • Satin paint finish
  • Meets NOCSAE standard and SEI Certified

Check Lowest Price Here

                                                                                                                                                                                                                                                                                       




Rawlings Junior/Senior Velo Matte Batting Helmet with Jaw Guard

Rawlings Junior VELO Matte Batting Helmet w/ Extended Jaw Guard 1

Junior: (Fits Hat Sizes: 6 3/8 – 7 1/8)

Senior (Fits Hat Sizes: 7 1/8 – 7 15/8)

Highly protective thanks to the addition of an extended Jaw Guard, the Rawlings® Junior VELO™ Matte Batting Helmet helps keep you confident and covered as you step up to the plate this season. This helmet also utilizes 16 vents that are strategically located to circulate cool air and keep you comfortable.

Exceptional Comfort, Supportive Construction:

  • 16-Vent Design: COOLFLO® XV1™ venting delivers airflow from a variety of angles for long-lasting comfort
  • Heat Exchange™ Technology: Rapidly circulates ambient air to create an overall cooling effect
  • EXT Jaw Guard: Provides additional facial protection towards the pitching mound without limiting visibility
  • Wrapped Jaw Pads: Improves comfort/fit while helping absorb potential impact

Additional Details:

  • Size: Youth / Junior (fits hat sizes: 6-3/8’’ – 7-1/8’’)
  • Meets NOCSAE® standards
    • Brand : Rawlings
    • Country of Origin : Imported
  • Style : VLE11J, VLE11J-LHB

Check Lowest Price Here (Junior Helmet)     

Check Lowest Price Here (Senior Helmet)

                                                                                                                                                                                                                                                                                   



Batting Helmet Sizing Chart

Leave a Reply

Your email address will not be published. Required fields are marked *

Facebook
Facebook
Twitter
Visit Us
PINTEREST
PINTEREST